Your Compact AWG Solution
GEN-M1 produces up to 220 L/day of pure, mineral-balanced drinking water from air with just a standard electrical outlet. Perfect for clinics, schools, off-grid homes, and temporary sites, it pairs patented GENius™ efficiency with advanced 0.2 µm filtration, UV sterilization, and on-demand external storage.
Contact Sales to learn more and partner with Watergen.
GEN-M1 is a mobile, energy-efficient Atmospheric Water Generator that produces up to 220 liters of clean drinking water daily from air, needing only electricity to operate. Ideal for schools, clinics, and off-grid homes, it uses patented GENius and advanced purification technologies. GEN-M1 works in varied climates and can connect to an external smart storage system to ensure fresh, high-quality water throughout the day.
Fresh and safe drinking water extracted from air. Purification and filtration systems combined with UV lamp ensure clean, safe and tasty drinking water available throughout the day.
In a wide range of climate conditions: starts from 15°C and 20% humidity
Fitted with wheels for full mobility, no plumbing needed. Easy transportation to anywhere needed
Reduces the need for plastic water bottles, logistic and transportation. Reduces carbon footprint.
Needs only connection to single phase electrical socket
Our revolutionary, patented heat-exchanger produces up to 220 liters of drinking water per day
Complies with international drinking water safety standards
External drinking water storage and high-quality treatment system
GEN-M1 draws ambient air through a sub-micron pre-filter and our patented GENius™ heat-exchange coils to condense humidity into water. That water then flows through a multi-stage purification cascade—sediment, activated carbon, UV sterilization and mineral balancing—before being pumped into your external storage tank ready for on-demand dispensing.
Daily Output
Up to 220 L/day
Varies by inventory
Unlimited at tap (dependent on flow)
100–500 L/day (typical small-scale units)
Energy Consumption
2.2 kW nominal (~0.4 kWh/L)
N/A
~0.02 kWh/L (tap pumping)
~1.0 kWh/L (many competitors)
Filtration & Taste
0.2 µm sediment → carbon → UV → minerals
Factory-sealed, plastic-aged
Depends on local quality + filter cartridge
4-stage (often no mineral balancing)
Infrastructure
Plug into any 230/240 V outlet — no piping
Storage space & deliveries
Plumbing installation + under-sink filter
May require professional install & plumbing
Storage
External tank (smart circulation & quality alerts)
Disposable plastic bottles
Built-in tank or direct flow
Often built-in but limited capacity
Climate Range
≥ 15 °C & ≥ 20 % RH
N/A
N/A
Typically ≥ 30 % RH; less efficient in low RH
Maintenance
Cartridge swap every 12 months; automated alerts
None (but purchase & disposal)
Cartridge swap every 3–6 months
Filter change every 6–12 months; higher service
Sustainability
Zero plastic, low energy, locally generated
Single-use plastic, transport emissions
Depends on municipal source
Varies — often higher energy and filter waste
Water generation capacity:
Up to 220 liters/58 gallons per day
Water temperature
Ambient water
Water purification:
Multi step filtration cascade down to 0.2 micron of water certified filters set, followed by a germicidal UV lamp. Vital minerals balance the water pH to achieve high purification and tasty drinking water.
Working environment:
≥15°C. Relative Humidity: ≥20%
Power consumption:
2.2 kW (nominal)
Nominal Operation Voltage:
EU: 1 Phase 230v/50Hz; US: Split phases 240v/60Hz
Facility power distribution unit Circuit breaker:
EU: 1 Phase, 250 Vac, C16A, and residual current circuit breaker ; US: 2 Phases, 250 Vac, C16A, and ground fault circuit interrupter
Dimensions (L x W x H):
400 Wh/Liter for water generation in standard conditions (26.7°C, 60%RH)
Weight:
350 kg
Air filtration:
Sub-micron barrier filter that eliminates <2.5 particulate matter
Water tank:
External tank required
Installs in minutes with only an electrical hookup – no plumbing or civil works.
Runs from 15% to 95% humidity and –5 °C to 50 °C – perfect for deserts, tropics, and everything in between.
0.2–0.7 kWh per liter versus 0.8–1.5 kWh on static or RO systems – slash energy costs.
Multi-stage filtration + mineralization delivers crisp, balanced taste – exceeds NSF and UL standards.
Proven in 90+ countries, backed by CE, UL, NSF certifications and local service partners.
Proven in 90+ countries, backed by CE, UL, NSF certifications and local service partners.
Installs in minutes with only an electrical hookup – no plumbing or civil works.
Runs from 15% to 95% humidity and –5 °C to 50 °C – perfect for deserts, tropics, and everything in between.
0.2–0.7 kWh per liter versus 0.8–1.5 kWh on static or RO systems – slash energy costs.
Multi-stage filtration + mineralization delivers crisp, balanced taste – exceeds NSF and UL standards.
Proven in 90+ countries, backed by CE, UL, NSF certifications and local service partners.
Proven in 90+ countries, backed by CE, UL, NSF certifications and local service partners.
Honored by global leaders in innovation, sustainability, and technology.
Creating Water from Air around the World
Sign up and be the first to know about the latest developments and exciting news on how we are shaping the future!
Copyright © 2025 Watergen | Designed by Core Concepts.
